REH4MAT

Wrapping around Wrist support made of perforated ActivePren™ and covered on both sides with a thin polyester fabric. The orthosis is equipped with a fastening tape and a polyamide clip allowing stabilization of the joint providing alleviation of stress from forearm and hand muscles. The use of Wrist support is recommended for sport exercise and work.

Purpose of use
after wrist injuries
bursitis
joint degeneration or inflammation

Wedge is made of anatomic-shaped polyurethane foam and it is equipped with cotton cover. On the device’s surface there are air ducts which provide air flow and prevent the bedsores. High quality of the foam allows to use the wedge even by overweight patients and guarantees proper relaxation and leg support.

The cushion maintains legs in the slightly elevated position during lying on the back or side. It is used to support and relaxation of leg’s muscles and as an after-injury, anti-bedsore and anti-varicose veins therapy.

During side lying the device maintain the legs in anti-lordotic position. Its anatomic shape prevents against the pressure and provides the comfort of use.

The wedge is the best support for compression therapy treatment. During the night, the blood goes towards heart what reduces lower limbs girths what allows to putting on the compression devices.
Purpose of use:
Vascular system treatment
Muscles cramps
Lower limb pain and swelling
Spine conditions
Varicose veins
Cold feet
Pregnancy
Physical therapy
To support and relax of the stressed legs
The wedge is especially recommended for pregnant women and patients with vascular disorders. It can be used during lying on the back or side at night or diurnally.

Our orthopedic travel cushion should be used in travel when prevents against the bedsores. It improves the sleep comfort during rest or travel. It is natural neck support in car, train, bus or plane. It maintain the head in the correct position.

REAR OPEN KNEE BRACE WITH LEAF SPRING HINGES

IB-SK/A knee brace is made of innovative, providing compression and skin-friendly fabric called CottonPren. The fabric is made of neoprene foam, laminated with polyester and interal elastic cotton terry.

CottonPren

Our brace construction is unique because it has open knee brace function (it’s easy to putting on) and closed brace function (very good patella and knee stabilization because of anatomic-shaped patella donut).

The brace is very good for drivers, because patient can sit into car seat, remove the brace very fast and easy and put it on before alighting from the car.
In addition, the brace has open popliteal fossa, what improves comfort of use and allows skin to breath.

In addition, the brace has open popliteal fossa, what improves comfort of use and allows skin to breath.

IB-SK/A is equipped with two sets of circumferential straps and our innovative elastic leaf spring hinges.


Purpose of use
IB-SK/A knee brace should be applied in cases of:

knee dislocation,
knee twist and sprain,
side instability of the knee joint,
knee ligaments LCL, MCL and ACL injuries,
knee ligaments reconstruction,
other surgeries (orthopedic).
Available sizes
Size Knee circumference How to measure


How to measure - knee circumference
M 34,5-38 cm
L 38,5-42 cm
XL 42,5-46 cm


Setting up
Setting up

Leaf spring hinges
Leaf spring hinges





The brace is equipped with leaf spring hinges. The splints are made of high quality alloy of metal and plastic. This construction provides anatomic knee motion with excellent lateral knee stabilization. The IB-SK/A brace helps in knee extension, because of used high quality spring steel.

The orthosis AR-SO-02 is characterized by strong circumferential stabilization on lumbar area, thanks to elastic fasteners.

The orthosis is made of strong orthopaedic rubber AirRubber™.

The Orthosis is provided with anatomically shaped metal stays (sweat-resistant coating), which quantity depends on the size; 4 or 6 metal stays in the Back. The Cross System in the back provides additional reinforcement of stabilization at Lumbar area.



Properties
– SKIN FRIENDLY PRODUCT – lumber support has been made of special orthopaedic rubber, containing mainly cotton, which is neutral to patient’s skin
– EFFECTIVENSS OF STABILIZATION – thanks the anatomically shaped orthopaedic nibs and tightening rubber belts crossed at the back, the stabilization is exceptionally good.
– SAFETY – the front securing tape provides additional protection and the chances of the device to undo accidentally are eliminated.
– COMFORT OF USAGE – the limber support is very light and therefore comfortable to wear.

Indications
– Pre- and Post-Surgical Stabilization
– Degenerative Spinal pathologies on Lumbar area
– Disc Hernia
– Lumbar Muscles and Ligamentous Strains and Sprains
– Postural Support
– Chronic Low Back Pain
– Rehabilitation and Prevention

Orthopedic collar, Florida type, made of polyurethane plate and finished with polyurethane foam and double-layer ProFit™ material, which perfectly fits patient’s body.

The collar stabilizes and releases pressure form the spine in the neck area, releases stress from neck muscles.

Properties
Stabilizes and releases stress from the neck section of the spine and neck muscles. Recommendation and instruction regarding length of use depend on leading doctor’s decision.

Purpose of use
– After injury of the neck section of the spine (sprains and bruises)
– In rehabilitation after spinal fracture in prophylactic or surgery treatment
– In severe and chronic pain of the neck and shoulders due to the injury, overstress or degenerative changes
– In degenerative changes of the neck section of the spine combined with neurological symptoms (neck radiculopathy, paresis of upper limbs, balance disturbance, vertigo)
– In headaches and tympanophonia due to neck problems
– In torticollis due to different reasons

Contraindications
– Too tight application of the support may lead to increase of the problems, too loose application- luck of expected function
– Difficulty in breathing and discomfort, increase of existing problems- may limit or make impossible the use of the support (especially in case of overweight patients, with thyroid problems and increased neurotic symptoms) – after consulting with the leading doctor.
– It is necessary to control the correctness of the use of the support in case of children and patients with memory disorder or mental problems
– In case of skin changes in the place where the support touches the skin (abrasions, injuries, eczema) – use of the support is possible after a dressing is applies

Sacroiliac Joint Dysfunction (SI Joint Pain)
SI Joint Pain

Functional conditions of sacroiliac joints occur more often in women than men, because of hormonal damages.

Sacroiliac joints lie next to the bottom of the spine, below the lumbar spine and above the tailbone. They connect the spine with sacrum. They are small but very strong and, supported by strong ligaments, act as a shock-absorbing structure.

Nowadays it is not clear how the SI Joint Pain is caused, but it is thought that an alteration in the normal joint motion may be the culprit that causes sacroiliac pain and degeneration. Hypermobility and instability can cause pain in the lower back and hips and radiating into groins. In case of hypomobility and stiffness, the pain is typically felt on one side of the low back and can radiate down the leg even into ankle. This kind of condition is often misunderstood for sciatica.

SI Joint Pain

The best solution for prevention and reducing the pain is our sacral brace AM-OK/CCA. Equipped with innovative CCA compression system supports and off-loads the sacroiliac joints.

Product description
Sacral brace AM-OK/CCA is made of fabric ActiveSpace™.

AM-OK/CCA sacral brace is comfortable so you can wear it under clothes all day.
It is made of two independent anatomic-shaped elements what allows device to fit the body precisely. Free space between these elements makes sacral skin breathing.

There is compression system called CCA in the rear part of AM-OK, which stabilizes pelvis and is it possible to size the brace even in broad-haunched or with pot belly patients. Our CCA system is the best orthopaedic innovation in the market.

The wide non-elastic circumferential strap is stabilizing element which adjust compression of the sacral spine.

The brace is equipped with rigid sacral pellotes also connected with CCA System what provide excellent support and stabilization.

Purpose of use
1. Sacroiliac arthrosis
2. Sacroiliac Joint Syndrome.
3. Sacroiliac joint instability
4. Pubic symphysis dehiscence
5. Sacroiliac joint dysfunction
6. Painful syndrome of the pelvis muscles or tendinopathy
7. Lumbo-sacral spine spondylosyndesis
8. Sacral stress fracture

Product description
Knee brace AS-KX-08 is an excellent product in case of knee osteoarthritis. The brace is open-designed so offers easy application for people with limited hands functions. It’s made of light, comfort waterproof fabric UniPren™.

UniPren™ is loop-hoop fabric for easy adjustment of compression. Due to this fact, knee brace AS-KX-08 offers therapeutic compression and reduces bruises.

What’s more, the brace AS-KX-08 is equipped with lightweight hinge and two lateral splints 1R made of plastic. The splints provide smooth range of motion adjustment in every 15 degrees and possibility of knee immobilization if required.

The brace’s design allows to use it in case of Baker’s cyst. The back of the knee brace is a “free zone” and do not cause the compression of the Baker’s cyst. This solution allows to change the bandages in the popliteal fossa without necessary of removing the brace from the leg.

Knee brace AS-KX-08 is an excellent support in case knee instability and painful syndromes. It maintains knee joint in alignment and offers smooth knee movement. Knee brace AS-KX-08 stabilizes the knee joint and provides its immobilization if required. A brace offers wide range of circumferential adjustment. Due to this fact, the bracer may be used in case of different sizes of the leg, e.g. when the swelling disappears.



Purpose of use
• knee sprain and strain
• knee instability,
• knee osteoarthritis / OA knee,
• Baker’s cyst
• LCL, MCL and ACL ligaments injuries

Wrist support made of UniPren™.

Applying
The support presses the muscles improving blood circulation and positively influencing the oxygen distribution through the whole body. This support provides perfect stabilization of the wrist, reduction of pain caused by overstress, old injuries and degenerative changes, increases the strength of the grip (e.g. tennis, weights lifting). Maintenance of stable temperature and elastic pressure results in reduction of swelling, helps in healing of post-injury effusions and hematoma. Enables faster come back to wok and training.

Purpose of use
after wrist injuries
bursitis
joint degeneration or inflammation

Tennis elbow develops as an result of lateral epicondyle inflammation in effect of forearm and wrist extensors and supinator muscle. It is called from tennis because it occurs in forehand movement but it’s possible in other sports (baseball, squash) and non-athlete activities.

Golf elbow is caused by micro-injuries of the medial epicondyle. A patient suffers from inflammation and pain, sometimes severe, on the inner part of the elbow. A lot of researchers claim that too tightly squeezing the stick causes stress of the forearm and wrist flexors that is why we call this condition Golfer’s elbow.

Innovative elbow strap AM-LX-02 with the silicone insert provides pressure on the afflicted muscles and tendons. Clinical trials show that over 80% of patients feel relief during using this kind of elbow brace.

The AM-LX-02 strap has an internal silicone insert that provides pressure on the muscles insertions and micro-massage during use of the support. Polyamide clip and VELCRO tape enable the adjustment of the strap to the limb.

Purpose of use
Tennis elbow
Golf elbow

Size
Single size

Groins brace AM-PPB
ABDOMINAL HERNIA BELT WITH SILICONE PELOTTE

Hernia is a condition when organ goes outside the abdominal cavity. It occurs in abdomen but in spine or oesophagus also. The abdominal wall is torn and peritoneum with intestine goes outside the cavity. We can touch and see the advanced hernia which has the soft under-skin node shape. Many times it causes the stomach ache.
The hernia occurs when the abdominal wall is weak, mainly in children or seniors. It is connected with physical activity such as weightlifting or obesity and pregnancy. It occurs in postoperative scar lesions also. The great solution in this case is using the hernia abdominal belt before the surgery.

Product description
Our belt AM-PPB is made of elastic, friendly for skin material AirSanmed.



The belt is also equipped with internal pocket with innovated silicone pelotte. This pelotte is anatomic shaped and soft silicone fits the body precisely and closes the foramen of hernia tightly.

Purpose of use
limits existing abdominal hernias
chronic supports existing abdominal hernias when the patient is not operable
Available sizes
Size Waist circumference How to measure
Single size min 60 cm – max 145 cm

Jumper’s knee brace EB-P/RZ was made of the best materials. The brace support the external insertion of the quadriceps femoris tendon. Thanks to that it stabilizes and support the knee-cap and prevents the patellofemoral pain. The brace contains silicon anatomic-shaped pad also, which is semi-rigid and provides great knee support. Furthermore, this anatomic shape prevents slipping the brace during the physical activities. Additionally the use of Velcro tape allows for final fit of the support to the knee joint. This is the best solution for athletes. Made of AirDistance II™ and Sanmed II™.

Purpose of use
Osgood-Schlattera Disease
Jumpers knee (Patellar tendinitis)
Stressed patellar ligament
Patellarfemoral joint degeneration (chondromalacia patellae)
Subluxation/proximal hypermobility of the tibiofibular joint

The carpometacarpal joint of the thumb, called saddle joint, is one of the most movable joints in human body. Because of that, it is prone to injuries and conditions. The joint incorporates 5 movement in different planes: abduction and adduction, opposition and retrooposition and circumduction. Sport brace AS-N-02 is created for joint protection. It is made of anatomic glove and equipped with set of elastic straps, which are easy to attach and allow to set thumb in the required position.

The abduction thumb brace holds wrist circumferential strap guaranteeing proper joint compression and 2 elastic tapes, which abduct the thumb.

The device enables to set the thumb in the required abduction position. The brace is very easy to putting on and off.

The brace is made of AeroSpace™.

Purpose of use
after wrist injuries
bursitis
joint degeneration or inflammation

Thumb brace AM-D-04 is dedicated to skiers. It supports the thumb joint in case of “Skier’s Thumb”. This condition is a result of falling down into ski stick and based on injury of the CMC joint and twisting or straining the ulnar collateral ligament (UCL) of the thumb.

Such tendon injuries in the carpometacarpal joint of the thumb (carpometacarpal joint) are connected with pain so stabilization of the joint is very helpful in the swelling treatment.

Thumb brace AM-D-04 supports the carpometacarpal joint with anatomic-shaped splint. The healing process of the thumb is improved because of the limited range of motion. Using of the brace decreases the pain connected with rheumatism, joint degeneration or injury.



The brace is made of thermoactive material ActiveSpace™ and Air rubber III™

The thumb brace provides excellent CMC joint stabilization by plastic fitting the device. Is it possible to adjust limited movement in the thumb joint.

Purpose of use
Skier’s Thumb – injury of the ulnar collateral ligament (UCL)
instability of the carpometacarpal joint of the thumb in the early osteoarthritis
joint dislocation
after osteotomy, arthroplasty or ligament reconstruction
Benett or Roland fracture
twisted CMC joint
thumb muscles strain
prophylactically in sport

Product description
Thumb brace AM-D-01 made with innovative material AirSanmed. Inelasticity of the textile, allows maximum stabilization and immobilization of CMC joint. There is a cotton soft textile in contact with the skin that prevents against the sweating.

AM-D-01

The external layer is comfortable semi-rigid and perforated foam, covered with medical perforated laminate allowing breathability of the skin and sweat evaporation.

AM-D-01

Schematic drawing of the AirSanmed fabric:

AirSanmed

The front opening design allows easy application and the closure system with straps regulation to adapt perfectly to each hand anatomy. The wrist brace is provided with Velcro strap stabilizing the thumb. Individually adjustment of the thumb-strap length by cutting for a perfect fit.

AM-D-01

Besides, the thumb brace is equipped with two independent circumferential straps. Patient can adjust them freely what prevents against the brace slipping.

AM-D-01

What is more, the brace is equipped with lateral aluminium splint for thumb abduction. The angle of abduction is achieved by splint moulding.

AM-D-01

Purpose of Use
De Quervain Syndrome
Skier’s Thumb
Treatment of injuries and post-surgical rehabilitation especially for Basal Joint Arthritis
Tendinitis
After cast removal
Available sizes
Size Wrist circumference How to measure
M 13-17 cm
L 17-21 cm

FINGER SPLINT

Product description
Finger immobilizer splint AM-D-02

The Splint is intended to immobilize the distal interphalangeal joints and carpometacarpal joints of the fingers as following: index finger, middle finger, ring finger and little finger. The ortshisis is not recommended for Thumb stabilization.AM-D-02 finger immobilizer splint is the universal orthosis, developed to be used for dorsal or palmar immobilization, for Right as well as Left hand.
Finger immobilizer splint AM-D-02

The orthosis is equipped with self-adhesive velcro strap for finger stabilization, as well as thin fitting circumferential strap.
The thin strap consists in optional protection, which could be totally removed according to the Doctor or specialist recomendation if necesarry.The Orthosis is provided with anatomically shaped, malleable and removable alluminium strip.
The fitting on the Wrist is obtained by circumferential Velcro strap, which additionally provides stability at the wrist joint and protects against to unwanted opening.
The Finger Splint is made of comfort foam and breathable cotton terry cloth in contact with the skin of the patient. Outside the splint is covered by self-adhesive fabric which offers wide range of product adjustment.
ActivDistance II

Available sizes
Size Wrist circumference How to measure
M 13-17 cm
L 17,5-21 cm
Purpose of use
II-V fingers fractures
Injuries of collateral ligaments of MCP joints
II-V fingers dislocations
rheumatic diseases of II-V fingers
Properties
Provides optimal stabilization of distal interphalaneal joints by individual fitting.
Possible to adjust the angle of distal flexion to be immobilized.
Breathable fabrics that is used in construction of the splint, provides great comfort to the patient.
Easy fitting.
Functionality
Immobilization of digit with slight stabilization of the wrist

Finger splint AM-D-05
Modular hand brace AM-D-05

Product description
AM-D-05 is the boxer’s fracture brace. This condition based on fracture of the neck of fourth and/or fifth metacarpal bones. The brace provides stabilization of the metacarpal and interphalangeal joints of fourth and fifth finger.

This is innovative product, which can be used in hand surgery and is very helpful in rehabilitation process.

The brace is equipped with splint made of polyamide with ROM adjustment. The adjustment is possible thanks to Allen key. The device has the open construction what allows to fit it to every shape and size.
The brace consist of circumferential hand strap with thumb stabilization and two forearm straps and fingers tapes. The material of the brace is easy to attach so you can fasten the straps in the required position.

The brace is made of comfortable fabric ActivDistance II which is easy to attach.

ActivDistance II

Our device provides:

proper immobilization of the metacarpal and interphalangeal joints,
early mobilisation
great ergonomic
Purpose of use
Boxer’s fracture
fractures of the metacarpal and interphalangeal joints of fourth and fifth finger
fourth and/or fifth finger strain or dislocation
Available sizes
Size Wrist circumference How to measure
M 13-17 cm
L 17-21 cm

Open wrist support was developed according to anatomic shape, providing stabilization on wrist and radiocarpal joint and thumb.

Orthosis is made of innovative AirSanmed II™ non-elastic textile.

LOCK 3-POINTS Circumferential Compression allowing adequate support and unloading of radiocarpal joints. The orthosis is provided with anatomically shaped, malleable and removable metal Strip for Palm (sweat resistant coating) and 2 Dorsal plastic stays.

Open construction of brace allows easy-fitting and offers whole range of adjustment and stabilization for different anatomies of the wrist.

The wrist brace is additionally equipped with Soft Elastic Pad in Distal Palmar area, which makes the product more comfortable.

The fitting on the Wrist by Velcro straps and hand cinch, which ends of closure are provided with plastic covers, specially developed for patients with limited dexterity, such as osteoarthritis and wrist instability.

The orthosis with Thumb Abduction System contains an aluminum malleable strip and Velcro straps for adjustment of the thumb abduction.


3 points stabilization
L3P (LOCK 3 POINTS)



Purpose of use
after wrist injuries
bursitis
joint degeneration or inflammation

1 AM-KG-AR/1R 1R drop-lock with adjustment of range of motion in every 15 degrees.
2 AM-KG-AR/1R Unicentric splints made of lightweight high quality plastic with carbon fibres.
3 AM-KG-AR/1R Wrap around straps with Velcro closures.
4 AM-KG-AR/1R Chest belt for keeping the arm in adduction.
5 AM-KG-AR/1R Many buckles for easy application.
6 AM-KG-AR/1R Adjustable shoulder strap for perfect fitting.
7 AM-KG-AR/1R Shoulder pad which does not irritate the shoulder and neck.
8 AM-KG-AR/1R Forearm strap keeps the wrist in neutral position and prevents against the degeneration.
9 AM-KG-AR/1R Thermoformed parts for reducing the pressure of the hard elements.
Purpose of use
Stable fractures in elbow, humerus and forearm area,
Chronic elbow injuries,
Elbow hyperextension,
Range of motion control,
Tendons and ligaments injuries and repairs